You Will Need To Drill Out The Original Rivet Head To Remove The Factory Door Pins And Bushes

Peening/Hammering The Bushes And Pins In Is Required – Simply Sliding Them Into Hinges Will Not Keep Them In Place

Please Grease The Pins Before Installation

After Installation, The Door May Be Tight To Open/Close, However Will Loosen As The Bushes And Pins Wear In

Fitment

Fit For Holden HQ MONARO HJ HX HZ WB Front Door

Fit For Holden FE FB FC EK Rear Door

Package

4 x Hinge Door Pins
8 x Brash Bushes